Hi, need a little help or some tips how to solve the following:
At 2000 ft, at 1750 RPM 0°C the POH stats these fuel flow numbers at given torque numbers:
TRQ|FF
|1970|427|
|1800|400|
|1600|370|
|1435|345|
I made some changes to the density_on_ff_table to to bring the ingame numbers close, but there is a difference based on power as you can see from ingame testing:
TRQ/FF/diffference
|1970|433|+6
|1800|396|-4
|1600|356|-14
|1435|326|-19
As you can see on high power FF is higher than it should be and on lower power it is lower then it should be.
Can I fix this with engine parameters ?
(Note that airspeed is in the ballpark to the POH and only has a slight linear error across the board , so that should be easy to fix)
Edit: I tried changing PowerSpecificFuelConsumption but it had no effect. What am I missing ?