I get a mix of tank capacity and quantity when I use FUEL SYSTEM
flight model.cfg
[FUEL_SYSTEM]
Version = 3
Engine.1 = Name:Engine_1#Title:Engine 1 Title#Index:1
Tank.1 = Name:CenterTank#Title:Center Title#Capacity:15#UnusableCapacity:0.5#Position:0,0,0#PressureCurve:0#DropTimer:0#Priority:0
Tank.2 = Name:Right Main#Title:Rignt Main Title#Capacity:30#UnusableCapacity:0#Position:0,0,0#PressureCurve:0#DropTimer:0#Priority:0
Tank.3 = Name:Left Main#Title:Left Main Title#Capacity:30#UnusableCapacity:0#Position:0,0,0#PressureCurve:0#DropTimer:0#Priority:0
Tank.4 = Name:Right Aux#Title:Right AUx Title#Capacity:12#UnusableCapacity:0.5#Position:0,0,0#PressureCurve:0#DropTimer:0#Priority:0
Tank.5 = Name:Left Aux#Title:Left Aux Title#Capacity:12#UnusableCapacity:0.5#Position:0,0,0#PressureCurve:0#DropTimer:0#Priority:0
[FUEL]
;[REMOVED]LeftMain = -5.9,-2.099971,-0.999986,30,0
;[REMOVED]RightMain = -5.9,2.099986,-0.999993,30,0
;[REMOVED]Center1 = -6,-0,-1.3,15,0
;[REMOVED]Center2 = 0,0,0
;[REMOVED]Center3 = 0,0,0
;[REMOVED]LeftAux = -5.626685,-13.885882,7.207202,12,0.5
;[REMOVED]LeftTip = 0,0,0,0,0
;[REMOVED]RightAux = -5.626685,13.885882,7.207202,12,0.5
;[REMOVED]RightTip = 0,0,0
;[REMOVED]External1 = 0,0,0
;[REMOVED]External2 = 0,0,0
fuel_type =1
;[REMOVED]number_of_tank_selectors =1
;[REMOVED]electric_pump =1
;[REMOVED]engine_driven_pump =1
;[REMOVED]manual_transfer_pump =0
;[REMOVED]manual_pump =0
;[REMOVED]anemometer_pump =0
;[REMOVED]fuel_dump_rate =0
;[REMOVED]default_fuel_tank_selector = 1 ; Default fuel selector used in case of autostart, default is ALL.
Why do i get center tank capacity and quantity values in simvarwatcher. Is this a concern?
flight_model.cfg was manipulated with AE only - no manual entries.